Tag Archives | Foundation

Criteria for Deciding the Depth of Foundation | Soil Engineering

Footings are placed at some depth below the ground surface with minimum embedment for the following purposes (Lambe and Whitman): 1. To gain additional bearing capacity derived by the embedment. 2. To place the footing below the zone of seasonal moisture variations for protection against swelling and shrinkage cycle in case of clayey soils and against the frost action in [...]

By |2018-02-16T16:51:55+00:00February 16, 2018|Shallow Foundation|Comments Off on Criteria for Deciding the Depth of Foundation | Soil Engineering

How to Determine the Bearing Capacity of Foundation? | Soil Engineering

Plate load test (PLT) is an in situ test to determine the bearing capacity and probable settlement of a foundation under any given loading. The test essentially consists of loading a rigid plate in increments at the foundation level and determining the settlements corresponding to each load increment. The settlement of foundation can be obtained from the load-settlement relationship obtained [...]

By |2018-02-16T16:51:54+00:00February 16, 2018|Shallow Foundation|Comments Off on How to Determine the Bearing Capacity of Foundation? | Soil Engineering
Go to Top