Tag Archives | Shear Strength

Shear Strength of Sand: Characteristics and Factors | Soil Engineering

In this article we will discuss about the characteristics and factors affecting the sheer strength of sand. Shear Strength Characteristics of Sand: Shear strength characteristics of sandy soils depend on the drainage conditions in addition to several other param­eters as discussed in the following subsections. 1. Shear Strength Characteristics of Saturated Sands during Drained Shear: It is nearly impossible to [...]

By |2018-02-16T16:51:52+00:00February 16, 2018|Shear Strength|Comments Off on Shear Strength of Sand: Characteristics and Factors | Soil Engineering

Shear Strength Characteristics of Clays | Soil Engineering

Shear strength characteristics of clays unconsolidated undrained conditions are discussed below for normally con­solidated clays and pre-consolidated clays. 1. Normally Consolidated Clays: After consolidation under cell pressure is complete, no excess pore water pressure is present inside the sample. However, when the specimen is subjected to the subsequent increase of axial stress, under undrained conditions, an increase in excess pore [...]

By |2018-02-16T16:51:52+00:00February 16, 2018|Shear Strength of Clays|Comments Off on Shear Strength Characteristics of Clays | Soil Engineering

Direct Shear Test: Apparatus and Procedure | Shear Strength | Soil Engineering

In this article we will discuss about:- 1. Apparatus for Conducting Direct Sheer Test 2. Preparation of the Soil Specimen 3. Assembly of the Apparatus 4. Test Procedure 5. Determination of Shear Parameters 6. Determination of Principal Stresses 7. Merits 8. Demerits. Apparatus for Conducting Direct Sheer Test: The equipment for the direct shear test consists of a square or [...]

By |2018-02-16T16:51:51+00:00February 16, 2018|Shear Strength|Comments Off on Direct Shear Test: Apparatus and Procedure | Shear Strength | Soil Engineering
Go to Top